Draw Lines in Plan Revit Not Visibal
None of the created elements are visible.
I have been using Revit for eight years now, and the most common trouble I even so have to solve is when I get the Revit "none of the created elements are visible" warning.
Today I'g going to cover the virtually common reasons an object is hidden. Some will exist very basic and some might surprise you. Past the end you volition have some new Revit tricks upwards your sleeve to assist you out adjacent time you get the dreaded Revit alert.
1A. Revit Item is Hidden
The item is subconscious. I know, that doesn't help much, simply the showtime few things to cheque are whether the Revit element is hidden by being…hidden, every bit opposed to being filtered, or out of phase or another more than advanced problems.
The start check is to click the lightbulb at the lesser of the screen. Any subconscious items volition show up in pink. Select the item, right click, and select "Unhide in View". Selecting Category will unhide all objects of that type, like all furniture. If "Elements" is available it means that the object yous are looking for has been individually hidden.
This paradigm shows a regular flooring plan with the lightbulb turned off (left) and on (correct)
1B. REVIT Particular IS Hidden
Clicking the lightbulb and selecting "Unhide in View by Category" is the same equally going into Visibility Graphics (VV or VG) and checking the visibility box side by side to a category.
Notation that an detail may also be hidden by Element. This ways that specific example was turned off. Correct this by right clicking and selecting Unhide in View By Element.
The image below shows the connection betwixt Unhide in View by Category and the Visibility Graphics Dialogue.
1C. REVIT ITEM IS Hidden
If you click the lightbulb, select an object, right click and choose Unhide in View, but the only option is "By Filter" the most probable reason is that the view has a template applied. In this case, access the Visibility Graphics dialogue via the view template and turn on the category you're trying to view.
REVIT detail subconscious by WORKSETS
If an item is on a workset that is not visible in your view, it won't show up in pink when you click the lightbulb. Become to Visibility Graphics, select the Worksets tab and see if there are any worksets that are turned off. A common one I employ is Site. I don't want my topo and/or property lines showing up in 95% of my views, and then I put that stuff on a Workset that is always off. Then I don't have to hibernate that stuff in every view, and I tin can turn on the workset in the couple views I really want to see those items.
The image below shows how my topography is not visible in the left view, even though Topography is turned on in Visibility Graphics and the lightbulb is turned on. The image on the right shows the Site workset existence turned on, from it's Global Setting of "Not Visible."
Revit Item Hidden past View Range
The Revit View Range controls what's visible in a view past setting vertical ranges of visibility. The near common consequence with view range is that something is to a higher place or below the view range. Clerestory windows are a common detail that are not visible due to being above the view range. Foundations in a foundation program are not visible due to being below the view range. You can set these bug past changing the view range or using a plan region.
Here's a good article about the Revit View Range, direct from Autodesk.
Revit Detail Hidden past View Scales
Sections and Elevations take a setting where they are automatically hidden at smaller scales. By default Revit volition hide sections at scales less than one/viii" = 1'-0" (1:96). To check this, select the department from the Revit Projection Browser, or a unlike view in which the section marker IS visible. In the Revit Properties panel notice the parameter "Hide at Scales Coarser Than" and change that value to a higher number. I usually set my Sections to hide at scales coarser than ane/iv" = 1'-0" (one:48) so they do not evidence upward if any of my drawings are set to 1/viii" = 1'-0" (1:96)
The image below shows a department set to be hidden at scales coarser than 1/iv″ = 1′-0″. The department is visible in the one/4″ programme on the left, just non the 1/8″ plan on the right.
Revit Detail Hidden by Detail Level
Wall layers, window muntins, door jambs, appliance details…there are lots of items that announced differently or not at all depending on the Item Level of the view. Coarse volition prove the fewest details, Fine will show the virtually. If yous tin't meet something like the layers of a wall, check the view detail level and effort a higher setting.
The particular level tin also exist set individually for items, split up from the setting of the entire view. Go to Visibility Graphics and check out the Detail Level on the far correct side. This will unremarkably exist Past View, but you tin can also specific that sure categories will always display Grade, Medium or Fine, regardless of the view settings.
Y'all can also investigate within the family. Elements within a family may have their visibility settings and can be turned off in plan, section, summit or by phase.
Image below shows a muntin family that has been embedded in a window family. The muntin model is fix to but be visible in views with Fine detail level.
Revit Item Hidden by Filters
Revit filters provide another layer of organizing views. You tin create filters to hide or show elements based on dissimilar parameters. The most common filter I utilize is one that hides section and elevation markers when that section or superlative is not on a sheet. I apply this to help keep my final drawings squeamish and clean. I always accept a duplicate working with that shows everything, including all department markers, only on my concluding drawings I want to make sure I don't end upwards with blank view references.
I explain filters and how to use them in my beginner Revit training course, Residential Architecture with Revit: Volume I.
The paradigm below shows how to use View Filters to hide unused section markers.
Revit Item Hidden past Phase
Items in Revit are built at a specific identify, simply also at a specific time. The default Revit Phases are Existing and New. Items created in the New phase won't be visible in the Existing phase, considering they don't exist all the same.
Revit Items Hidden By Extents
If y'all are in an Tiptop or Department view, and you tin can't come across your levels or another department, information technology's possible the subconscious items does not actually cross over the view you lot are in. Levels and sections have actual 3d extents in Revit, so you lot need to brand sure these items actually pass all the way through your building for them to exist visible in all other views.
To check that your levels go all the mode through the building create a new uncropped section or tiptop that looks toward the forepart of your building. Select a level and brand certain there'due south a small 3D indicator on each end. Drag each end of the level so that it completely crosses over the building. Repeat this process from a side view.
The epitome beneath shows an acme with 3D levels not crossing the unabridged building. These levels may not be visible in sections D and Eastward on the left.
Revit Items Subconscious past Crop Region
The Revit crop view is another reason items might non be visible, acme markers in particular. The Revit height marker tin move independently of the bodily elevation location. This is done by dragging the foursquare role of the marker. Dragging the triangle part will motility the bodily view. Anyway, if an acme is not visible in a program view, gear up the Crop Region to exist visible and turn it off. Then single click on the triangle office of the elevation marker to view where the elevation is really being created. If it is exterior of the crop region, motion information technology inside with the arrow keys and and so turn the crop back on.
Epitome below shows a cropped plan view with a missing elevation mark. Turning off the ingather and selecting the elevation reveals that the top is outside of the crop purlieus.
langdonthissinat1964.blogspot.com
Source: https://hyperfinearchitecture.com/revit-how-to-fix-elements-not-visible/